- Bag
- SHOEI's original cloth bag for helmet is convenient for not only storage but also carriage.
Page Top
- Breath Guard/Mud Guard
- This component is to prevent fogging of a shield and to be fixed to defroster in a center of eye port. (note 1)
Page Top
- Chin Curtain
- This component is to prevent rolling-in of wind from around a chin and to be fixed to a bottom end of a helmet. (note 1)
Page Top
- Maintenance Kit
- This kit contains main items for maintenance such as silicone oil, water repellant agent and applicators.
Page Top
- Dual Liner
- An air route located between 2 layers of impact absorption liner exhausts hot air inside a helmet effectively.
Page Top
- Hyper Dual Liner
- Based upon 2 layered dual liner, both absorption and exhaust of riding wind are much more improved. It exhausts an air inside helmet widely and effectively.
Page Top
- Hyper Dual Liner II
- Most advanced version of dual liner performs the best ventilation by separated absorption and exhaust routes.
Page Top
- Semi Dual Liner
- Center of an impact absorption liner is 2 layered, and air routes conveys hot and humid air in top head to top outlet effectively.
Page Top
- Anti-Condensation Shield Ventilation System
- This system conveys an air from a top end of a shield to inside and eliminates or prevents fogging of a shield effectively.
Page Top
- Wing Vortex Ventilation
- This advanced vortex ventilation in wind shape improves high speed riding performance and realizes improvement of exhaust performance by 20% compared with cross vortex.
Page Top
- Cross Vortex Ventilation
- This X shaped ventilation is advanced from vortex ventilation performs stable exhaust in low speed riding with 15% improvement compared with vortex ventilation.
Page Top
- Arrow Vortex Ventilation
- This V shaped ventilation I advanced from vortex ventilation and improves stability in high speed riding and exhaust performance by 10% compared with former component.
Page Top
- Air Stabilizer
- This component fixed in a rear portion of a helmet stabilizes an air stream in a rear and performs as air outlet also.
Page Top
- Aero Edge Spoiler
- This component stabilizes an air stream in a rear decreases Drag and Lift in high speed riding substantially. An outlet in vortex shape is also equipped.
Page Top
- Breath Chamber
- This component exhausts an breath air inside a chin guard using negative pressure of riding wind and prevents fogging of a shield.
Page Top
- Bullet Ventilation
- An air intake in bullet shape equipped in top head absorbs riding wind into inside of a helmet effectively.
Page Top
- Extractor Ventilation
- This component stabilizes wind stream during a ride and performs effective ventilation. It is removable for easy maintenance.
Page Top
- Q.R.S.A.
- Shield mechanism for CW-1 shield. Shield is pressed to eye port with double actions to restrain invasion of rainwater and wind and to achieve never experienced quietness.
Page Top
- Q.R.S.B.
- A shield can be removed easily by pulling a trigger with a shield fully opened. A shield without cover restrains wind noise.
Page Top
- Q.R.V. & Shield Lock
- A shield base for CX-1V locks a shield while it is opened maintaining quick release system.
Page Top
- System
- This model equipped with open/close active protector performs confidence of full-face helmet while riding and realizes openness of jet type helmet while standing.
Page Top
- Fully Removable Interiors
- All of interiors can be removed for washing and fine adjustment of size. Note 1: A model in Q.R.I.P. system is in Emergency Concept*
Page Top
- 3D Full Support Inner III
- The Q.R.I.P. interiors consist of 3D center pad and 3D cheek pad and improve hold in rear head and around ears.
Page Top
- 3D Full Support Inner IIIS
- Based upon 3D Full Support Inner III, meshed material is used for 3D center pads to improve ventilation performance in top head.
Page Top
- 3D Full Support Inner IV
- 3D pad is designed for better fitting with the head to realize "Wrap around the head" feeling and ensured firm holding.
Page Top
- Lightweight Model
- Lightweight but high rigidity shell is realized by complex layers of many kinds of advanced materials and glass fiber.
Page Top
- AIM
- (Advanced Integrated Matrix)
SHOEI's own shell structure in complex layers of strong glass fiber and 3D formed organic fabrics secures high rigidity and realizes light weight.
Page Top
- AIM+
- (Advanced Integrated Matrix Plus Multi-Fiber)
High performance organic material in high elasticity is added to complex layers of strong glass fiber and 3D formed organic fabrics and realizes lightweight shell in high rigidity and elasticity.
Page Top
- Water Absorption and Quick Dry Fabric
- Special fabric by UNITICA born from most advanced technology is used. It absorbs sweat and moisture in surface of fabric quickly.
Page Top
- Helmet sizes of SHOEI helmet are as below.
-
Please keep below in your mind and wear in shop to cheese proper size.
XXS (51cm), XS (53cm), S (55cm), M (57cm), L (59cm), XL (61cm), XXL (63cm)
Note 1: Type to be able to fix and size differ depending upon a helmet.
* Emergency Concept: It indicates removable interiors for removing helmet easily by a third party with minimum load to neck in unexpected accident.
CLOSE
